Datei:Planar core assembly exploded.png
Originaldatei (1.280 × 960 Pixel, Dateigrößi: 154 KB, MIME-Typ: image/png)
Die Datei un d Informatione derzue were us em zäntrale Mediearchiv Wikimedia Commons (Allmänd) iibunde. | Zur Bschriibigssite uff de Allmänd |
Dieses Bild des Typs Technology sollte als Vektorgrafik im SVG-Format neu erstellt werden. Vektorformate haben zahlreiche Vorteile; weitere Information unter Commons:Media for cleanup. Wenn dir eine SVG-Version dieses Bildes vorliegt, so lade diese bitte hoch. Nach dem Hochladen der Datei ist diese Vorlage auf der aktuellen Bildbeschreibungsseite durch die Vorlage {{Vector version available}}, oder kürzer {{Vva}}, zu ersetzen. Es ist empfohlen die neue SVG-Datei „Planar core assembly exploded.svg“ zu nennen – dann benötigt die Vorlage vector version available (bzw. vva) keinen Parameter.
|
Bschryybig
BschryybigPlanar core assembly exploded.png | Exploded view of an planar inductor constituted by a spiral track on a printed circuit board and a planar magnetic core |
Datum | |
Quälle | Eigeni Arbet |
Urheber | Cyril BUTTAY |
Gnähmigung (Wyternutzig vu däre Datei) |
as licensed |
Anderi Versione | Image:Planar core assembly.png |
Dieses Bild wurde unter Berücksichtigung der Leitlinie für Qualitätsbilder bewertet und gilt als Qualitätsbild.
العربية ∙ جازايرية ∙ беларуская ∙ беларуская (тарашкевіца) ∙ български ∙ বাংলা ∙ català ∙ čeština ∙ Cymraeg ∙ Deutsch ∙ Schweizer Hochdeutsch ∙ Zazaki ∙ Ελληνικά ∙ English ∙ Esperanto ∙ español ∙ eesti ∙ euskara ∙ فارسی ∙ suomi ∙ français ∙ galego ∙ עברית ∙ हिन्दी ∙ hrvatski ∙ magyar ∙ հայերեն ∙ Bahasa Indonesia ∙ italiano ∙ 日本語 ∙ Jawa ∙ ქართული ∙ 한국어 ∙ kurdî ∙ Lëtzebuergesch ∙ lietuvių ∙ македонски ∙ മലയാളം ∙ मराठी ∙ Bahasa Melayu ∙ Nederlands ∙ Norfuk / Pitkern ∙ polski ∙ português ∙ português do Brasil ∙ rumantsch ∙ română ∙ русский ∙ sicilianu ∙ slovenčina ∙ slovenščina ∙ shqip ∙ српски / srpski ∙ svenska ∙ தமிழ் ∙ తెలుగు ∙ ไทย ∙ Tagalog ∙ Türkçe ∙ toki pona ∙ українська ∙ vèneto ∙ Tiếng Việt ∙ 中文 ∙ 中文(简体) ∙ 中文(繁體) ∙ +/− |
Lizänzierig
Des Dokumänt derf kopiert, verbreitet un/oder bearbeitet wäre unter dr Bedingige vu dr GNU-Lizänz fir freji Dokumäntation, Version 1.2 oder ere spetere Version, vereffetligt dur Free Software Foundation. S het keini uuveränderlige Abschnitt, kei vordere Umschlagstext un kei hindere Umschlagstext. E Kopii vu dr Lizänz isch verfiegbar im Abschnitt GNU-Lizänz fir freji Dokumäntation.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue |
Die Datei isch lizänziert unter dr Creative-Commons-Lizenz Namensnännig – Wytergab unter glyche Bedingige 3.0 nit portiert. | ||
| ||
Die Lizänzmarkierig isch wäg em GFDL-Lizänzupdate zuegfiegt wore.http://creativecommons.org/licenses/by-sa/3.0/CC BY-SA 3.0Creative Commons Attribution-Share Alike 3.0truetrue |
- Du derfsch:
- des Wärch an anderi wytergee – des Wärch kopiere, verbreite un ibertrage
- des Wärch verändere – des Wärch aapasse
- Unter däne Bedingige:
- Namenännig – Du muesch aagmässeni Aagabe zum Urheber un dr Rächt mache, e Link zue dr Lizänz zuefiege un aagee, eb Änderige gmacht wore sin. Die Aagabe chenne in ere aagmässene Art gmacht wäre, aber nit eso, ass dr Yydruck entstoht, ass dr Lizänzgeber Dii oder Dyy Gebruch vum Wärch unterstitze un guetheiße.
- Wytergab unter glyche Bedingige – Wänn du des Wärch veränderesch, umwandlesch oder druf ufböusch, no derfsch s Ergebnis nume unter dr glyche oder ere kumpatible Lizänz wie s Orginal vereffetlige.
Made using povray 3.6 and the following code:
#declare RAD = on; // use radiosity? #declare Exploded=on; // exploded view or not? #declare CoilLength = 2.6; #include "functions.inc" #include "metals.inc" #include "colors.inc" global_settings { #if(RAD) radiosity { brightness 0.60 count 100 error_bound 0.2 gray_threshold 0.0 low_error_factor 0.2 minimum_reuse 0.015 nearest_count 10 recursion_limit 1 #if (version>3.1) adc_bailout 0.01 max_sample -1.0 media off normal off always_sample 1 pretrace_start 0.08 pretrace_end 0.01 #end } #end } background { color White } // declarations for the E magnetic core------------------------------------------------ #declare corner = intersection { // a quarter of cyclindic volume used to "round" the corners lathe { linear_spline 6 <0,0>,<0.05,0>, <0.1,0.05>, <0.1,2.95>,<0.05,3>, <0,3> rotate 90*x } box {<-10,-10,-10>,<10,0,10>} } #declare side = prism { // the extrusions of the volume linear_sweep linear_spline 0, 1, 9, <0.05,0>, <0,0.05>, <0,2.95>, <0.05,3>, <0.25,3>, <0.3,2.95>, <0.3,0.05>, <0.25,0>, <0.05,0> } #declare middle = prism { // the extrusion of the middle leg linear_sweep linear_spline 0, 1, 9, <0.05,0>, <0,0.05>, <0,2.95>, <0.05,3>, <0.95,3>, <1,2.95>, <1,0.05>, <0.95,0>, <0.05,0> } #declare Ecore = difference { union { object {side scale <1,3.4,1> rotate -90*z translate <-1.7,0.2,0> } object {side scale <1,0.5,1> translate -1.8*x } object {middle scale 0.5*y translate -.5*x } object {side scale <1,0.5,1> translate 1.5*x } object {corner translate -1.7*x} object {corner translate 1.7*x} } union { // the notches where the clips sit box {<-10,-10,1.2>,<-1.5,0,1.8>} box {<10,-10,1.2>,<1.5,0,1.8>} } pigment {Gray50} } // declarations for the I magnetic core------------------------------------------------ #declare Icore = difference { union { object {side scale <1,3.4,1> rotate -90*z translate <-1.7,0.2,0> } object {side scale <1,0.2,1> translate -1.8*x } object {middle scale 0.2*y translate -.5*x } object {side scale <1,0.2,1> translate 1.5*x } object {corner translate -1.7*x} object {corner translate 1.7*x} } union { // the notches where the clips sit box {<-10,-10,1.2>,<-1.5,0,1.8>} box {<10,-10,1.2>,<1.5,0,1.8>} } pigment {Gray50} } //declaration of the coil element----------------------- #declare coil = union { union { #declare NbTurns = 8; #declare Pitch =0.08; // the distance between two loops #declare Xstart =0.6; // the spiral rolls around the origin #declare Zstart =2; #declare InitCorner =0.4; // initial length of the 45degree filet #declare Index=0; #declare Width=0.05; #declare DeltaL=Pitch*tan(radians(22.5)); //variation in lenght of the track on each turn #while(Index <= NbTurns) #declare Lengthcorner=InitCorner+2*Index*DeltaL; #declare Xlength=2*(Xstart+Index*DeltaL-InitCorner*cos(radians(45))); #declare Zlength=2*(Zstart+Index*DeltaL-InitCorner*cos(radians(45))); box{<0,0,0>,<-Width,0.01,-Zlength> translate <Xstart+Index*Pitch,0,Zlength/2>} box{<0,0,0>,<-Width,0.01,-Lengthcorner> rotate 45*y translate <Xstart+Index*Pitch,0,-Zlength/2>} box{<0,0,0>,<-Xlength,0.01,Width> translate <Xlength/2,0,-Zstart-Index*Pitch>} box{<0,0,0>,<-Width,0.01,-Lengthcorner> rotate 135*y translate <-Xlength/2,0,-Zstart-Index*Pitch>} box{<0,0,0>,<Width,0.01,Zlength+DeltaL> translate <-Xstart-Index*Pitch,0,-Zlength/2>} box{<0,0,0>,<-Width,0.01,-Lengthcorner> rotate 225*y translate <-Xstart-Index*Pitch,0,Zlength/2+DeltaL>} box{<0,0,0>,<Xlength+Pitch,0.01,-Width> translate <-Xlength/2,0,+Zstart+Index*Pitch+DeltaL>} box{<0,0,0>,<-Width,0.01,-Lengthcorner> rotate 315*y translate <Xlength/2+Pitch,0,+Zstart+Index*Pitch+DeltaL>} #declare Index = Index + 1; #end box{<0,0,0>,<-Width,0.01,-Zlength-0.5> translate <Xstart+Index*Pitch,0,Zlength/2>}//connections to the pads box{<0,0,0>,<Xstart-InitCorner*cos(radians(45))/2,0.01,-Width> translate <0,0,Zstart-InitCorner*cos(radians(45))/2>} box{<0,0,0>,<-Width,0.01,-InitCorner/2> rotate 315*y translate <Xstart-InitCorner*cos(radians(45))/2,0,Zstart-InitCorner*cos(radians(45))/2>} pigment { P_Copper4 } } cylinder{<0,0,0><0,0.015,0>,Width translate <Xstart+Index*Pitch-Width/2,0,-Zlength/2-0.5>} cylinder{<0,0,0><0,0.015,0>,Width translate <0,0,Zstart-InitCorner*cos(radians(45))/2-Width/2>} pigment { P_Copper4 } } //declaration of the pcb------------------------------ #declare PCB = difference { box { <-3,0,-3>,<3,0.2,3> } union { box {<-0.5,-10,-1.6>,<0.5,10,1.6>} box {<-1.9,-10,-1.6>,<-1.4,10,1.6>} box {<1.4,-10,-1.6>,<1.9,10,1.6>} box {<-2.0,-10,-0.3>,<-1.6,10,0.3>} box {<1.6,-10,-0.3>,<2.0,10,0.3>} } pigment{LimeGreen} finish{F_MetalB} } //declarations for the clip --------------------------- #declare halfclip = prism { linear_sweep bezier_spline 0, 1, 32, // the following points value come from another model, hence the fancy values <0,0>,<1.2,0>,<0,0>,<1.2,0>, <1.2,0>,<1.3,0>,<1.6,-0.2>,<1.7,-0.2>, <1.7,-0.2>,<1.8,-0.2>,<1.8,-0.2>,<1.8,1>, <1.8,1>,<1.9,1>,<1.8,1>,<1.9,1>, <1.9,1>,<1.9,-0.3>,<1.9,-0.3>,<1.7,-0.3>, <1.7,-0.3>,<1.6,-0.3>,<1.3,-0.1>,<1.2,-0.1>, <1.2,-0.1>,<0,-0.1>,<1.2,-0.1>,<0,-0.1>, <0,-0.1>,<0,0>,<0,-0.1>,<0,0> pigment {P_Chrome1} finish {F_MetalD} } #declare completeclip = union { object{halfclip scale 0.5*y} object{halfclip scale 0.5*y rotate 180*z translate 0.5*y} } // the final union------------------------------------------------- union { #if(Exploded) object {coil translate <0,1.9,1.5>} object {PCB translate <0,1.7,1.5>} object {completeclip scale <0.7/3.6,1,0.7/3.6> rotate <-90,0,-90> translate <-2.8,3.35,1.75>} object {completeclip scale <0.7/3.6,1,0.7/3.6> rotate <90,0,-90> translate <2.8,3.35,1.25>} object {Ecore rotate 180*x translate <0,3.7,3>} #else object {coil translate <0,0.4,1.5>} object {PCB translate <0,0.2,1.5>} object {completeclip scale <0.7/3.6,1,0.7/3.6> rotate <-90,0,-90> translate <-1.8,0.35,1.75>} object {completeclip scale <0.7/3.6,1,0.7/3.6> rotate <90,0,-90> translate <1.8,0.35,1.25>} object {Ecore rotate 180*x translate <0,0.7,3>} #end object {Icore translate <0,0,0>} #if(Exploded) rotate <0, -30, 0> #else rotate <0, -40, 0> #end finish { #if(RAD) ambient 0 diffuse 0.7 #else ambient 0.8 diffuse 0.5 #end phong 1 phong_size 60 } } light_source { <0, 14, -10> color White} light_source { <2, 4, -10> color White} #if(Exploded) camera {location <1,8,-15> look_at <-0.3,2.2,0> angle 26} #else camera {location <1,10,-15> look_at <-0.6,1,0> angle 17} #end
then compiled using the following command:
povray -IPlanar_core_assembly_exploded.png -W1280 -H960 -Q11 +A
In dieser Datei abgebildete Objekte
Motiv
Urheberrechtsstatus Tüütsch
urheberrechtlich geschützt Tüütsch
Lizenz Tüütsch
25. Juni 2006
Commons-Qualitätsauszeichnung Tüütsch
Qualitätsbild Tüütsch
Quelle der Datei Tüütsch
Dateiversione
Klick uf e Zytpunkt zu aazeige, wie s dert usgsäh het.
Version vom | Vorschaubild | Mäß | Benutzer | Kommentar | |
---|---|---|---|---|---|
aktuell | 11:23, 24. Jan. 2007 | 1.280 × 960 (154 KB) | Pngbot | optimized with optipng | |
15:11, 25. Jun. 2006 | 1.280 × 960 (209 KB) | CyrilB~commonswiki | {{Information |Description=Exploded view of an planar inductor constituted by a spiral track on a printed circuit board and a planar magnetic core |Source=Own work |Date=25/06/2006 |Author=Cyril BUTTAY |Permission=as licensed |other_versions= }} |
Verwändig vu dr Datei
Di folgende Sytene händ en Link zu dem Bildli:
Wältwyti Dateinutzig
Die andere Wikis bruche die Datei:
- Gebruch uf bg.wikipedia.org
- Gebruch uf ca.wikipedia.org
- Gebruch uf de.wikipedia.org
- Gebruch uf en.wikipedia.org
- Gebruch uf et.wikipedia.org
- Gebruch uf fr.wikipedia.org
- Gebruch uf hi.wikipedia.org
- Gebruch uf hu.wikipedia.org
- Gebruch uf it.wikipedia.org
- Gebruch uf uk.wikipedia.org
- Gebruch uf wo.wikipedia.org